Mounted frame, junction box and the cleaning process
After module lamination is completed, loaded into the
frame, junction box and module loading washing step. Install border, is to give
a good assembly is mounted on a laminated aluminum frame, increase the
mechanical strength of the components, further sealing photovoltaic modules de solar generator energy,
extended battery life, and the battery pack leads to positive and negative
busbars lead solder and junction box the corresponding terminal pin or plug
welding, assembly and then cleaned.
The module junction box of solar backup generator should be checked regularly to prevent weathering. Package should be inspected once every quarter and wiring connectors each of the solar cell module, if there is a plastic package water, battery discoloration and loose fitting, off-line, corrosion, etc., should be cleared up.
corrosive solvents.1.Consider installing an array of solar panels required azimuth, tilt angle.
2.Between the panels need to avoid blocking. It includes surrounding buildings (poles, house eaves, etc.)
3.Stent placement stability and robustness (considering the local meteorological data, such as hours of sunshine, severe weather, storm, etc.)
4.Trace distance and combiner box location. Try to walk the line and the average distance is short
5.Related accessories to meet the system requirements (such as terminals, with wire diameter, etc.)
6.Terminals should be strong, to prevent false or disconnection
7.Battery terminals should firmly (do not be short-circuited) Note polarity installation, to avoid explosions and fires
没有评论:
发表评论